zh_CNChinese

Site-wide Search

Search AllProductSolutionNews
Click to search

Diversified Product Ecosystem Enhance Customer Experience

Products
Product Parameters
Core Function
Product Advantages
Application Scenario
Application Cases

Products

计量背夹（超高频）
计量背夹（超高频）
计量背夹（超高频）
计量背夹（超高频）
计量背夹（超高频）

Measurement Back Clip (UHF)

This product needs to cooperate with the cell phone back clip, including BeiDou positioning function and UHF RFID function, which can realize the operation ability of UHF electronic tags, such as tag inventory, read tag storage, write tags, lock tags, inactivate tags, etc., and it can be applied to the business of warehousing inventory, electric device ID and so on. BeiDou positioning can realize the acquisition of location information and satellite time, can be applied to the inspection business, this product is embedded in the back clip of the cell phone through the Type-C port to get power and data interaction use.

Product Parameters

name (of a thing)parameter value
Functional characteristics
UHF RFID1) Support ISO/IEC 18000-6 and GB/T 29768-2013 air interface protocol;
2) Support 840-845MHz, 920-925MHz and 902-928MHz frequency bands;
3) Transmit power range supports 0-30dBm, adjustable in 1dB steps;
4) Built-in antenna is used;
5) Reading distance: 0 to 18 meters (depending on the type of label);
Beidou positioning1) Support BDS/GPS/GLONASS/QZSS multi-system joint positioning;
2) Support real-time dynamic differential (RTK) positioning method;
3) Frequency: BDS B1I, B2I, GPS/QZSS L1C/A , L2C, GLONASS L1, L2;
(4) The synchronization time error is not greater than 0.1μS;
5) First positioning time: cold start ≤ 60 seconds;
6) Navigation Data Format: NMEA 0183 V4.1, RTCM3.X;
7) Positioning accuracy: 2.5m for single-point positioning, 2cm+1ppm for external source differential (CEP).
physical interfaceStandard Type-C USB port, support charging and discharging function
protection classIP54
Drop resistance heightGreater than 1.2m
electrostatic ratingContact discharge 8kV, air discharge 15kV
environmental temperatureWork: -30℃～55℃; Storage: -40℃～70℃.
Environmental humidityWork: 10% to 90%RH; Storage: 5% to 95%RH.
weightsApprox. 160g
body sizeLength 162mm, Width 75mm, Thickness 16mm

Core Function

  • UHF reading function to read the asset tag and realize the asset information recording.
  • Innovative development of marketing and distribution through one-click recording tool,near the meter box, realize one-click collection of tower lines, meter boxes, meters, concentrators and other asset numbers, and achieve the archive relationship verification according to the measurement of asset coding specifications.
  • Using the back clip's ultra-high frequency read and write function to read the asset tag information, and write the inspection information to the tag, and after successful writing, the inspection record will be synchronized back to the back-end main station, realizing the integrated on-line and off-line inspection.
  • Check whether there is redness and heat in the equipment wire clamps, tension-resistant wire clamps, transformer stubs, cable joints, knife gates, switches, etc., to detect hidden problems in a timely manner, and to ensure that the customer power usage safety and reliability is an important task of on-site inspection work.
  • The current work mainly uses infrared temperature measurement terminal and other equipment to assist in carrying out the work, there are difficult temperature measurement points localization, inaccurate, temperature measurement records still need to be recorded manually as well as equipment procurement costs and other issues, at the same time the model does not meet the requirements of mobile operation of a terminal.
  • The use of cell phones + back clip work mode, combined with RFID temperature measurement electronic tags, one-click read the temperature data, compared with the traditional infrared thermometer temperature measurement, has high accuracy, high data timeliness, data uploading without manual records, low o&m cost advantages, and to achieve the integration of multi-professional functions of the mobile operation to reduce the number of equipment to carry, and effectively solve the field "Multi-terminal problem".

Product Advantages

UHF RFID can operate UHF electronic tags, such as tag inventory, read tag storage, write tags, lock tags, inactivate tags, etc., can be applied to warehousing inventory, electric device ID and other business.

Application Scenario

In order to enhance the rate of staff mobile handheld facilities and equipment provision, maximize the satisfaction of business needs, and improve the efficiency of on-site operations, we upgraded the staff mobile work terminals and promoted the "cell phone + back clip" work mode. At the same time, in order to focus on resource sharing and reject blind configuration and idle waste, the company carries out the pilot project of "cell phone + back clip" working mode and promotes its application in accordance with the construction principle of "unified planning and step-by-step implementation".

Application Cases

UHF reading function to read the asset tag and realize the asset information recording.
Innovative development of marketing and distribution through one-click recording tool,near the meter box, realize one-click collection of tower lines, meter boxes, meters, concentrators and other asset numbers, and achieve the archive relationship verification according to the measurement of asset coding specifications.
Using the back clip's ultra-high frequency read and write function to read the asset tag information, and write the inspection information to the tag, and after successful writing, the inspection record will be synchronized back to the back-end main station, realizing the integrated on-line and off-line inspection.
Check whether there is redness and heat in the equipment wire clamps, tension-resistant wire clamps, transformer stubs, cable joints, knife gates, switches, etc., to detect hidden problems in a timely manner, and to ensure that the customer power usage safety and reliability is an important task of on-site inspection work. The current work mainly uses infrared temperature measurement terminal and other equipment to assist in carrying out the work, there are difficult temperature measurement points localization, inaccurate, temperature measurement records still need to be recorded manually as well as equipment procurement costs and other issues, at the same time the model does not meet the requirements of mobile operation of a terminal.
The use of cell phones + back clip work mode, combined with RFID temperature measurement electronic tags, one-click read the temperature data, compared with the traditional infrared thermometer temperature measurement, has high accuracy, high data timeliness, data uploading without manual records, low o&m cost advantages, and to achieve the integration of multi-professional functions of the mobile operation to reduce the number of equipment to carry, and effectively solve the field "Multi-terminal problem".